|
Post by ricksrex on Feb 25, 2007 21:11:38 GMT
I am going to junk the carb icing facility off the Rex & need to know which bits I can bin & which bits I need to keep(& where to re-connect etc) if anyone has done it or any advice fellas ? All will be appreciated.
|
|
|
Post by ZRX Gremlin on Feb 25, 2007 21:58:16 GMT
Evenin'ricksrex and welcome to our site. A couple of questions for you: 1. Why, what do you hope to gain? 2. Which model have you got, there may be differences in the way they're set up. I know that the later model 1200 had modified or different carbs fitted to it.
|
|
|
Post by Les on Feb 26, 2007 21:11:39 GMT
Unless your in spain or calaforny I would not advise it,
|
|