|
Post by kevrex on Nov 11, 2006 23:21:14 GMT
This might seem like a dumb question but hear goes we are painting jnr's GPZ 500S when we bought it the front side light didnt work i thought it might be a bulb we have taken the faring off and ther is no side light at all in the head light can any one help us out ?? and tell us just where it should be thanks in advance
|
|
|
Post by BADGER on Nov 12, 2006 1:57:17 GMT
If it's an import, some countries done use/need side lights, so they dont fit them. But if she is an UK model, may be it had front damage, and they have fitted a import front fairing...? think that might be it.
Not sure about getting it through the MOT, if a light is fitted, then it has to work, but not sure if you "need " to get one fitted to get through the MOT.?
No dought some one will correct me, or tell a better reason.
|
|
|
Post by Les on Nov 12, 2006 13:07:23 GMT
Me brothers gonna switch his on and have a look after when he gets back to it, he's a steward for Arsnal. So he's ties up till the game finishes.
ps. they are NOT an MOT requirement.
|
|
|
Post by kevrex on Nov 12, 2006 13:38:15 GMT
Thanks lads i didnt know that the wernt a mot requierment trucker thanks for the info and you are right mickaelzrx it has a spill because the front fairing is broke but we knw about that when we bought it any way i will get on with the painting now and sort the light out later
Thanks again
|
|
|
Post by BADGER on Nov 12, 2006 15:19:56 GMT
Just had a thought Kev, does the light switch go from off to headlight, (2 position) if it does you never had a side light in the first place. Thanks for that Trucker, so you dont need one. and dont forget to take some pics Kev
|
|
|
Post by kevrex on Nov 12, 2006 23:32:20 GMT
Yes ther is a side light switch mickael we have had a look and some fool has made a make shift side light in to the fairing all the wiring is there just no hole in the head light unit it must be a europien light so i am giong to drill the light ther is a cross where the light goes and i will fit one myself
Yes as soon as its done i will post some pics should be done for tuesday and it is looking good
|
|
|
Post by BADGER on Nov 13, 2006 23:22:16 GMT
..... it must be a europien light so i am giong to drill the light ther is a cross where the light goes and i will fit one myself Thats just what i was thinking then, they have mass produced them, and put a cross there for the UK models to be fitted with a side light. Well done that man
|
|
|
Post by kevrex on Nov 14, 2006 23:10:15 GMT
Hi all I have got the side light in and working thank god and have finished the painting on jnrs gpz when it has been compounded,polished and the decals fitted i will post a few pics thanks to all for showing an interest BTW michaelzrx haw are you getting on with the inserts i sent ?
|
|
|
Post by BADGER on Nov 17, 2006 23:10:54 GMT
...BTW michaelzrx haw are you getting on with the inserts i sent ? .. eeerrrrmmmmm ive not forgotten mate
|
|