Let me know what you think of it for a first attempt.
Chat room? Which sadarse suggested that? Not bad, however came across a problem almost immediately. When I logged in, I did a test post, then logged out. I logged back in, and it wouldnt let me, telling me that my username was already used by someone. I suspect that theres a time delay on it, but with so many people in and out of chat at busy times it may become tiresome. <billy no mates> wish I had a friend to chat to to test it properly</bnm>
The chatroom does work. I was in there the other night with somebody. It reminds me of the old sleazybored chat if anybody can remember that far back. The main differences being that you can actually get in there, don't get logged out every five minutes and there's only ever going to be the one Gremlin in there instead of the 17 that I managed to acheive on one occasion.
Problems? Yes, it's not ideal. It's not integrated with the site in any way so there's no means of telling if it's being used or not. A way round this would be to log into chat and PM your friends to let them know. Some of us used to do tht anyway so no real diffference. The other way would be to pre-arrange set times?
I've just realised, my post #5 above was from all the way back in February. A lot has happened since then. We have a new chatroom to the one previously advertised and it is properly integrated with the board.
That mouseover thingy was installed by proboards themselves when they upgraded from V4 to the current V5.
It only occasionally ever worked for me unless I got good at target practice and hovered my mouse over the exact right pixel then moved it in the exact right direction afterwards. I gave up with it in the end and went back to the original way, which still exists, and involves you letting go of your mouse and typing a couple of numbers in a box instead of clicking with your mouse.
I'll have a look and see what I can do but the code for it is part of proboards and I have no control over it.
Just noticed that this feature is actually working here where it never did before.
Would never have spotted that without your help Burchy.
Joking aside. Are you absolutely sure that your Java is up to date? Most of the features on the board are Java driven, including Live Chat which I already know you have bother with.
Either that or the problem is browser related. Most of my tinkering around here is tested elsewhere using Firefox but I do always check the results in IE, Avant, and Opera before unleashing my ideas on an unwary public.
Kwikasfooki: Hi everyone, I'm Alan a roofer from Stourbridge.
May 22, 2014 5:42:28 GMT
Kwikasfooki: Just got back into biking after having my Bandit stolen. Maybe a good thing because i wouldnt have bought my ZRX1100C1
May 22, 2014 5:44:19 GMT
Kwikasfooki: what upgrades should i take to improve my zrx1100c1 or should i just buy a later 1200? any advice would be gratly appreciated
May 22, 2014 6:04:12 GMT
shyted: Hello,Dave here, just bought a mint fire cracker red 1100c4.It's my second ZRX,and not a day to soon.
Sept 29, 2014 6:00:56 GMT
sparkyt: Hi all ! I'm tony electrician from London . My ride is a Rex 1200r with a few modifications
Oct 17, 2014 15:40:39 GMT
gerbil: hiya i'm Kevin from Stourport loving my 97 rex
Dec 29, 2014 13:48:28 GMT
dodgydal: Hi all, just bought a ZXR 1100, don't know what the C1,2,3,4 is or means can anyone enlighten me ?
May 8, 2016 13:57:29 GMT
mickkyc: hi im mick and have a zrx1200r 2002 model i love this bike..Can anybody tell me if these have a built in immobiliser on the ignition thanks guys also do you ever meet up ?
Jul 26, 2016 21:57:49 GMT
cowboy: Hello 🐑🐑🐑 from Bernard been missing for a while !! Even forgotten my name and pass word lol hope all you guys and girls are ok xxx
Jan 28, 2017 21:36:19 GMT
drack1: Hi, Question, I am rebuilding my ZRX1100-C2 I have just installed new bearings to the swing arm. Looking at the diagram in the manual the diagram I believe is wrong.
Jan 29, 2017 2:48:12 GMT
drack1: the diagram shows The top hat spacer fitting to be on the left. But it will only fits on the right side running throught the seal and upto the large ball race bearing. Anyone else found this issue. ?
Jan 29, 2017 2:54:23 GMT
drack1: dodgydal: The C1,C2,C3,C4 Relates to the bikes model year. Eg; C1 = 1997 C2=1998 C3=1999 C4=2000
Jan 29, 2017 19:50:31 GMT
zrxpilot: Aye up anyone on, just joined,
Feb 28, 2017 19:06:41 GMT
bigsteve: hi all, im steve, from farnham surrey, got a burgandy 1100c2
Mar 4, 2017 19:18:53 GMT
floydzrx: Hi Floyd from Manchester just joined. I have a 98 C2 1100
Jun 27, 2017 11:53:33 GMT
murphyzrx: HI ..IS THERE ANY BODY THERE??
Aug 26, 2018 14:21:45 GMT
bikerpaul: Hi Folks ....i've just joined i'm in the Scottish Highlands riding a zrx12r 2001
Oct 14, 2018 10:46:27 GMT
mickkyc: hi lads and lasses I'm mick from bracknell I've just got myself an 02 1200R i love these bikes can't wait to get it on the road it needs a couple of bits as it was stolen and recovered (ba....ds). Anyway take care. All the best.Mick
Sept 20, 2021 20:25:29 GMT