|
Post by ozziesda on May 29, 2011 1:00:30 GMT
Hi lads, I've got 2 questions that needing answering as they have been wrecking my head and google isn't much help for once!! :hair: Firstly, Question 1, Anyone got any idea if there is anywhere that re rubbers diaphragms for the Keihin cvk carbs? Don't fancy being screwed by the 'main stealer' over here!! Was wondering why it was running rough after a good clean and balance so, I pulled off the caps and low and behold on carb no 1, I must have pinched it on re-assembly and put a pinhole in the feckin thing Failing that, Anyone got any ideas what other carbs fit?? Question 2, Do ZXR400 downpipes fit on the ZRX400?? I want to get rid of the one piece exhaust as the megaphone silencer is damaged from a previous owners 'off'. I can't find a 3" diameter link pipe or adapter from the collector so cutting it ain't an option. Cheers for the Dave
|
|
|
Post by lightspeed on May 29, 2011 3:29:29 GMT
I'm wondering if you could rescue the existing diaphram by patching the pinhole with a small dab of silicone or something like that .
|
|
|
Post by ozziesda on May 29, 2011 9:21:02 GMT
Cheers lightspeed.
Will give it a go. Nothing to lose as any attempted repair is better than a damn hole!!
|
|
|
Post by Burchy on May 29, 2011 12:04:04 GMT
I've sucessfully repaired a diaphrapm in the past with tube repair rubber solution and a tiny patch cut out with scissors from a regular patch. Make sure its thoroughly dry before reassembling. If its not dry the petrol vapour will ensure that it never dries!
|
|
|
Post by Young Burchy on Jun 11, 2011 23:11:58 GMT
Ref Q2; I have never heard of zxr400 pipes fitting the zrx400. So really don't know on that one. I would almost be more tempted to look down the 550/zzr600d route?? Wouldn't be too confident on that either though. DK Motorcycles list new ones on ebay, but they aint cheap.
|
|