|
Post by Les on May 28, 2007 17:53:39 GMT
Right I am blatently stealing this idea from next door. They have a thread about loaning stuff like panniers etc. Well its a good idea, I have actualy loaned out my rack/topbox once already to martin from next door for a european tour. Well I have just fitted a new UK headlight assembly into RubyRex, as when she came back from MOT there was more tape and deflectors on the headlight than actual headlight and she aint going through that every year. I was just about to drop the EU one in the bin, when I thought no wait, its about 45 mins to swop them over and would be well worth it, for euoropean touring. So Im gonna keep it, but if anyone wants to borrow it then they are welcome.
Its off the 's' model
NO OFFENCE, BUT PLEASE ONLY POST ON HERE IF YOU HAVE SOMETHING TO LEND OUT.
IF YOU WISH TO BORROW AN ITEM, PLEASE PM THE MEMBER CONCERNED. THAT WAY IF IT TAKES OFF IT WILL SAVE SOME POOR SOD TRAWLING THROUGH LOADS OF POSTS.
|
|
|
Post by Kwackers on May 30, 2007 18:58:34 GMT
I have a 1200 standard end can, a tail piece and an 1100 stainless chainguard should anyone require loan of.
|
|
|
Post by phoenix on May 30, 2007 20:38:42 GMT
I see Les has been busy deleting stuff........
I've got a half empty tin of WD40 if anybody wants to borrow it, it's a little bit rusty around the lower seam but otherwise OK.
|
|
|
Post by screwloose1200 on Jun 9, 2007 12:49:03 GMT
I've got a half empty tin of WD40 if anybody wants to borrow it, it's a little bit rusty around the lower seam but otherwise OK.[/quote] ;D ;D
|
|
|
Post by Burchy on Jun 10, 2007 19:14:51 GMT
MORGAN CARBALANCER
I got one of these puppies and if anyone fancies a ride to the New Forest I am happy to balance the carbs for/with you. Due to their rather delicate nature I'm not proposing to post them out to anyone, though.
|
|
|
Post by ZRX Gremlin on Jun 16, 2007 21:15:14 GMT
Pah!! Forevever the pessimist, Phoenix. I've got a similar one and it's half full. I've also got a chain link splitter/rivetter if anybody needs to borrow it. It's an expensive enough piece of kit to have lying around if it never gets used but has already paid for itself in saved labour charges on my own bikes. If you can get to "Gremlin Towers" with your new chain I'll gladly do the job for you or bring the tool to one of our meets and do it there. Failing that, send me a PM and we can negotiate postage charges.
|
|
|
Post by guyver1 on Oct 30, 2011 17:46:34 GMT
I've got a set of stud extractors, the type that fit over the stud, not drill out the centre types. Anyone gets stuck I'll post the bit out or if your local bring the bike or offending part to me.
|
|